Step 1 Create Logical Drive
This section describes how to create a logical drive on RAID-0.
|
➢
|
To create a logical drive on RAID-0: |
|
1.
|
Power up the server. If the server is already powered up and running, use the 'reboot' command (from system console as user root) to reboot the server. |
|
2.
|
While the server is powering up, monitor the server. |
|
3.
|
During restart, press <F9> to open the System Utilities. |
|
4.
|
Choose Embedded Applications > Intelligent Provisioning > Smart Storage Administrator. |
|
5.
|
Wait for the Smart Storage Administrator utility to finish loading. |
|
6.
|
In the left-hand pane, choose HPE Smart Array Controllers > HPESmart Array E208i-a SRGen10; an Actions menu is displayed. |
|
7.
|
Click Configure, and then click Clear Configuration to clear any previous configuration. |
|
8.
|
Click Clear to confirm; a summary display appears. |
|
9.
|
Click Finish to return to the main menu. |
|
10.
|
In the left-hand pane, select Unassigned Drives (2); make sure that both the drives are selected, and then click Create Array. |
|
11.
|
Select RAID 0 for RAID Level. |
|
12.
|
Select the 'Custom Size' check box, and then enter 2000GiB. |
|
13.
|
At the bottom of the screen, click Create Logical Drive. |
After the array is created, a logical drive should be created.